Nixie Tube Clocks

Contact Us

Home »  Contact Us

If you want to get your own custom made vintage nixie tube clocks, please write us a line to popperskin [at] gmail.com.
Or leave a comment here, using your email, and we will contact you during ASAP:

Write a new entry for the Guestbook

 
 
 
 
 
 
 

Fields marked with * are required.
Your E-mail address won't be published.
It's possible that your entry will only be visible in the guestbook after we reviewed it.
We reserve the right to edit, delete, or not publish entries.
75 entries.
Adrian Flora Adrian Flora from Saillon wrote on October 6, 2020 at 8:18 pm:
Can I ord
Admin Reply by: admin
Sure, emailed you.
Darryl Waren Darryl Waren from Sydney, Australia wrote on October 3, 2020 at 10:15 pm:
Hi there I’m interested in a Steampunk. Can you please email me pricing and details of process. Thanks Darryl
Admin Reply by: admin
Hello Darryl Please check your email. Kind regards David
Larry Modder Larry Modder from Scituate, MA wrote on October 2, 2020 at 9:07 am:
I have seen these clocks and they are beautiful. One things is that they are smaller an 8" long and couple of inches high. Do you make them larger? What is the largest size I can order and how do I do that? Thank you.
Admin Reply by: admin
Hello Larry, Thank you for your question. What dimensions are you interested in? Kind regards David
Mark Dubey Mark Dubey from Syracuse wrote on September 28, 2020 at 10:40 pm:
Greetings, I am interested in commissioning a clock. Your quality and craftsmanship seems superb. Mark Dubey
Admin Reply by: admin
Hello Mark, Thank you for your interest. Just sent you a letter. Thanks David
Warren Gray Warren Gray from Cape Town wrote on September 28, 2020 at 11:49 am:
Hi there, would like to enquire , about purchasing tubes! And possibly a kit
Admin Reply by: admin
Hello! Than you for your interest. Unfortunately we don't ship to Cape Town now. Wish you good luck wit your search. Kind regards David
Frederick Lidman Frederick Lidman wrote on September 6, 2020 at 2:03 pm:
Hi, Your clocks are absolutely stunning! I saw them maybe one or two years ago, and fell in love with them immediately. Unfortunately they’re out of reach for me. But I can dream, can’t I? Now, I was scrolling through my FB-feed and found an ad that reminded me of your clocks. I don’t know if you’re interested but it feels like they hi-jacked your design. And with the pricing it feels like a scam. Just wanted to notify you. And if you take this down or don’t publish it - whatever way this works - I don’t mind. Best regards, /Frederick
Admin Reply by: admin
Hello, thank you for your notification!
Pareeksha Pareeksha from NY wrote on August 6, 2020 at 5:43 am:
Want to order one of your clocks . How can i order?
Admin Reply by: admin
Hello Just emailed you with the details. Have a good day David
Don Garrett Don Garrett from Arlington wrote on July 23, 2020 at 3:50 pm:
Your clocks appear to be beautiful! Do you use a processor to drive them? If so which? I'm interested in tying a clock into my home automation over WiFi to allow automatic time setting, turning off tubes when the house is empty, and dimming them based on conditions. I wouldn't expect support, exactly, though a copy of the source you use for firmware might be handy. Is this something you are open too?
Admin Reply by: admin
Hello, very neat idea you've got there. Our clocks are not IOT, they are not connected to Wi-Fi. We craft them using our own PCB and programming them. Though, I know that one can find detailed instruction of similar clock on radiokot portal. E.g. https://radiokot.ru/forum/viewtopic.php?f=51&t=83935&start=2360
James James from Oakland wrote on July 8, 2020 at 6:27 am:
Hello. I would like to purchase the clock from you. How do I star?
Admin Reply by: admin
Hello, I have sent you a letter with details. Thank you!
Mariam Mariam wrote on July 8, 2020 at 6:24 am:
Wanted to thank you one more time! My husband is very happy to have it.
Admin Reply by: admin
Thank you! Happy to hear that! Don't forget that you have 12 mnth warranty.
Les Frazier Les Frazier from Georgetown wrote on June 22, 2020 at 6:19 pm:
Can any of the nexie clocks be synced with satellites for more accurate time? My old nexie clocked synced and I still have the syncing device that plugs into the clock and has a small cable that I put under the close window and had it outside where it could interrogate the satellites. Thanks, Les Frazier
Admin Reply by: admin
Hello These clocks do not sync with the satellites yet, but we're working on it. Thank you
Teresa Anderson Teresa Anderson from Henrico wrote on June 20, 2020 at 11:18 am:
Hello, I am interested in buying the Steampunk clock. I had left a message a few days ago but have not heard back. I know the clock comes with one bulb. I wanted to buy an extra one. So two in total. How much will that cost? When a bulb is replaced do you just plug it in or is it more complicated than that? If I need more in the future can I purchase them from you? Thanks Tessa
Admin Reply by: admin
I am very sorry for such a late reply. Emailed you with the details. Kind regards David
Peter A Dufour Peter A Dufour from Portland wrote on June 18, 2020 at 2:27 pm:
Would love to purchase a Hal 9000 clock. Would you send me the details?
Admin Reply by: admin
Hello. Emailed you with the details. David
Tessa Tessa from Henrico wrote on June 16, 2020 at 4:14 pm:
Hello, I am interested in Steampunk. I was wondering how hard it is to replace a burnt out bulb. Do you just re-plug it in? Is it that easy or is there more involved. I see in the description that you include one extra bulb, how much more will it be if I get another one. So two in total? In the future if multiple bulbs burn out can I purchase them from you?
Admin Reply by: admin
Hello, Thank you for all your questions. 1. To re-plug the tube you have to be a little bit involve, though, I send video manual if needed. 2. If you buy 2 clocks you will get 2 spare tubes (but usually customers don't need them for years). 3. Sure, you can purchase tubes anytime from me. Kind regards David
Vincenzo Cancellara Vincenzo Cancellara from TO wrote on May 28, 2020 at 5:33 am:
hi, I ask if you can buy the PCB of the CLOCK_NIXIE. Thanks
Admin Reply by: admin
Hello, Thank you for your interest. I don't sell parts of the clock, except the tubes for now. Have a good day David
Kenneth Rubin Kenneth Rubin from New York wrote on May 22, 2020 at 10:06 am:
Hi, I love the clock. Bought it about 1 year ago (off amazon). Unfortunately, one of the tube burned out yesterday. This is not a model where the tubes are replaceable. Can you help me fix it? Thanks, Ken Rubin
Admin Reply by: admin
Hello Ken It's better to contact your seller, as all the clocks are different, and one master may be quite difficult to fix the clock made by another master. Good luck David
Peter A Dufour Peter A Dufour from Portland wrote on May 19, 2020 at 10:22 am:
Would love to learn more about your steampunk version.
Patrick Hillard Patrick Hillard from SAN DIEGO wrote on April 25, 2020 at 10:12 am:
Love your clocks. Really want to buy the Steampunk version that you show. Are you still in business and selling the clocks. Please let me know. Thanks much Pat Hillard
Admin Reply by: admin
Hello Pat, Thank you for your inquiry. Sure we are still in business. Sent details on your email. Have a good day! David
Patrick Hillard Patrick Hillard from SAN DIEGO wrote on April 24, 2020 at 5:31 pm:
Absolutely love the steampunk Nixie Clock. What is your lead time and latest cost? Would love to place an order. Patrick Hillard 858 682-1155 pch11@sbcglobal.net
Admin Reply by: admin
Thank you Patrick. Just sent details to you. David
Marc Dekker Marc Dekker wrote on March 31, 2020 at 4:25 pm:
Good afternoon, I am building my own nixie clock inspired by the Steam Punk here on the website. But I can not find the 3 leg corners used on the clock and the raster in the middle. Do you sell those aswell?
Admin Reply by: admin
Hello, Thank you for your request. Sorry, I don't provide corners only, as they are made for the exact body. It may mismatch with yours. David